Deutsch
English
Heating Stage for B-510DK
Product description
Optional extension for the B-510DK dark field microscope for customers who want to keep the sample temperature above room temperature. It is an upgrade consisting of an stage with built-in heating elements and a control unit for controlling the temperature.
Technical Specifications
- Temperature control range: from 20 ° C to 50 ° C
- Resolution of the temperature setting: 0.5 ° C
- Temperature measurement resolution: 0.1 ° C
- Average error between actual and displayed temperature: +/- 1 ° C
- Power supply: 110-220 V, 50-60 Hz, max. consumption: 25 W
Compatibility and installation
All you need for the conversion is a 3 mm Allen key, which is supplied by us. To install the new heated stage, please loosen the four screws that hold the old stage on the microscope and remove it. When removing the microscope table, please make sure that you do not get on the lenses and scratch or damage them. The four fastening screws are located on the down side of the microscope table and their position can be seen in the image below.
Then please position the new table on the table holder and fasten it again by tightening the four screws using the Allen key, as can be seen in the picture below.
You can then connect the cable of the heated table to the temperature control unit and set the desired temperature there.