This online shop is using cookies to give you the best shopping experience. Thereby for example the session information or language setting are stored on your computer. Without cookies the range of the online shop's functionality is limited. If you don't agree, please click here.

Model overview

We offer microscope cameras from several manufacturers and for various applications - from the eyepiece for tarinig at the school to highly sensitive HDMI cameras for darkfield investigations. Most models are equipped with software which supports measurements, time lapse and further specialized functions. We can advise you and propose you a solution for your application - just send us an email with the information about how you plan to use the camera!

Brand/Model HDMI
mode
USB mode Dyn.
resolution
fps 1
HDMI/USB
Specials
HDC/DF1 ✔Windows, Mac 1920x1080 60 / 30 SONY sensor
HDC/DF4 ✔ Windows 3840x2160 60 / 30 SONY sensor, 4K resolution, VideoOverNetwork[2]
Tucsen/TruechromeAF ✔ Windows 1920x1080 60 / 30 SONY sensor, autofocus
Tucsen/HD-Lite ✔ Windows 1920x1080 15 / 15
Dino-Lite/AM7025X ✔ Windows, Mac 2592x1944 - / 30 compact design
Dino-Lite/AM4025X ✔ Windows, Mac 1280x1024 - / 30 compact design
[1] Frames/sec at the highest supported resolution. Some models allow to set a lower resolution in order to increase the fps value. [2] Video streaming over Ethernet.

Operation modes of microscope cameras

USB cameras are connected to the PC through its USB interface. HDMI cameras provide the signal directly to the HDMI input of your HDMI monitor (see image below). Therefore they can be operated without a PC. The offered HDMI cameras have also a USB output port for an alternative USB mode operation.
Microscope with connected HDMI microscope camera

How to connect a c-mount camera to your microscope

A c-mount camera can be connected using one of the three methods shown below. If you own a trinocular microscope and also the c-mount adapter of its manufacturer (left), the c-mount thread of the camera (1) on the c-mount adapter (2) is connected. If you own a trinocular microscope with a third ocular tube (center) you will need an adapter which has at the one end a tube (5) with the diameter of your ocular (e.g. 23 mm) and at the other end, a c-mount thread (2). If you have a binocular microscope (right) then you need to remove one eyepiece (7) and insert there the camera-adapter combination.

How to connect a c-mount microscope camera to a microscope

How can i find the right c-mount adapter?

C-mount adapters can be found in our online shop under "Adapters and calibration slides". To be sure that the c-mount adapter is the right one for your microscope, you can email us your microscope type, the inner diameter of your trinocular tube and the desired camera. We check the compatibility with the camera manufacturer's technical support for you - for free within 1-2 business days.